Tips for creating stunning machine-embroidered T-shirts

2 minutes, 56 seconds Read

Embroidery is usually very in tune with the local customs and deeply rooted in the local culture. Because of their convenience, T-shirts have become a closet staple for most of you. Anything you can imagine, including onesies, quilts, pillows, and purses, can be embroidered by talented stitches. Making alterations to a T-shirt is a popular item. This article will give you ten useful tips for T shirt embroidery to make clothes that will have your friends and family green with envy. 

For stunning machine embroidery on T-shirts, consider these ten tips:

  • Pick the Best

What you pay for is what you get here. Get some nice shirts to start. Thicker cotton blends are easier to stitch and pucker than thinner ones.

  • Pre-wash

If you want to embroider on a shirt, wash and dry it first, as even the best no-shrink cotton clothing can shrink. If the fabric underneath your perfect 

T shirt embroidery design shrinks slightly; your embroidery will pucker.

  • Regain proper stability

Don’t ruin it if you plan on wearing it. That is the first rule of garment stabilization. For best results, use a fusible no-show mesh cut-away stabilizer. Use these to prevent knits from stretching out of shape and keep embroidery in place.

Fuse a piece of no-show mesh much bigger than the hoop size to the inside of the shirt, then turn it inside out. Then, once you’ve found the shirt’s center, you can hoop it. The hoop should hold it tightly without pulling it.

  • A proper needle and thread are required.

When embroidering on a T-shirt or sweatshirt, use a ballpoint needle. If a smaller needle will do the job, use it. Eileen Roche suggests using a 70/10 needle for finer knits and an 80/12 needle for heavier fabrics like sweatshirts.

The frequent washing and wearing of shirts make the polyester thread a good option because it resists fading and bleaching.

  • Go for a simple, airy layout.

T-shirt knits are ideal for embroidery with open designs. Stiff and lumpy shirts result from intricate designs, and the fabric often puckers at the seams.

  • The missing piece is the topping.

If you want your embroidery on knits to look its best, try using a water-soluble topper. Pin or baste a thin layer of water-soluble film over the embroidery area. It keeps the thread above the knits where it belongs for a clean, polished look. When done, rinse or wash the remaining residue away.

  • To hoop-bast

Use the basting stitch on your T shirt embroidery machine, if available. That will tack the shirt to the stabilizer and keep the design from sliding around. The topping is water soluble.

  • Trial Sewing

Preserve stained garments for use in stitching tests. They weigh about the same as the fresh shirt you plan to embroider. Embroidering on a test shirt is a great way to practice with different stabilizers, thread colors and design placement before committing to the real thing.

  • Take away any extra stabilizer.

Carefully cut away excess stabilizer from the embroidery’s finished edges and stitches. Cover the thread and stabilizer with a fusible tricot if you’re concerned about skin irritation.

  • Back-pressing is the key.

After embroidery, use a press cloth to remove handling creases and hoop marks.


T shirt embroidery involves adding decorative stitches to the fabric with thread, embroidery floss, or other materials. It’s a common practice to embellish fabrics with decorative stitches or laid thread to create attractive surface patterns. So, if you’re looking for a great embroidery t-shirt, you can easily find one in Ape London. 

Similar Posts